FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: pbabcock at hbd.org
***************************************************************
TODAY'S HOME BREW DIGEST BROUGHT TO YOU BY:
Sponsor The Home Brew Digest!
Visit http://www.hbd.org/sponsorhbd.shtml to learn how
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
DONATE to the Home Brew Digest. Home Brew Digest, Inc. is a
501(c)3 not-for-profit organization under IRS rules (see the
FAQ at http://hbd.org for details of this status). Donations
can be made by check to Home Brew Digest mailed to:
HBD Server Fund
PO Box 871309
Canton Township, MI 48187-6309
or by paypal to address serverfund@hbd.org. DONATIONS of $250
or more will be provided with receipts. SPONSORSHIPS of any
amount are considered paid advertisement, and may be deductible
under IRS rules as a business expense. Please consult with your
tax professional, then see http://hbd.org for available
sponsorship opportunities.
***************************************************************
Contents:
Re: HLT woes (bill keiser)
IPA (Fred Scheer)
Re: HLT woes (stencil)
pH with excess CaCO3 (Matt)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* The HBD Logo Store is now open! *
* http://www.hbd.org/store.html *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Beer is our obsession and we're late for therapy! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
NOTE: With the economy as it is, the HBD is struggling to
meet its meager operating expenses of approximately $3400
per year. If less than half of those currently directly
subscribed to the HBD sent in a mere $5.00, the HBD would
be able to easily meet its annual expenses, with room to
spare for next year. Please consider it.
As always, donors and donations are publicly acknowledged
and accounted for on the HBD web page. THank you
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
LOOKING TO BUY OR SELL USED EQUIPMENT? Please do not post about it here. Go
instead to http://homebrewfleamarket.com and post a free ad there.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITORs on duty: Pat Babcock (pbabcock at hbd dot org), Jason Henning,
and Spencer Thomas
----------------------------------------------------------------------
Date: Thu, 30 Apr 2009 07:16:39 -0400
From: bill keiser <bk2 at sharpstick.org>
Subject: Re: HLT woes
New problem to me, but I would assemble loosely, apply food grade
silicone, let set a day or two, then tighten. A more heavy duty version
would be to put a SS plate between the fitting and the silicone, a
fender washer would do, or you could fabricate a rectangular plate to
create more support. This would be more solid and act as a heatsink to
help with any heat conductance problem with the silicone. It would in
effect create a flat wall, but it would be thicker than the original.
Adding another washer/plate on the outside with silicone and make the
whole thing even more solid, but thicker yet.
I don't know how hot it gets at that point, probably not too hot with
wort present. If it does, you could use high temp silicone, but I don't
know how food safe it is.
I've done the silicone trick on motorcycles and car engines with good
results. Letting it cure while loose and then tightening makes it more
secure. Applying a film of some kind of oil before the silicone is
applied will make it easier to disassemble later on, but all the exposed
oil should be cleaned off before using.
Bill Keiser
> Somehow I've had the devil of a job building an HLT out of an
> aluminium stock pot and an electric heating element. The problem is
> that the element has a flat flange, while the pot has a curved side.
>
------------------------------
Date: Thu, 30 Apr 2009 12:29:44 +0000 (UTC)
From: Fred Scheer <fredscheer07 at comcast.net>
Subject: IPA
Date: Tue, 28 Apr 2009 15:37:03 -0700
> From: "Chad Stevens" <zuvaruvi at cox.net>
> Subject: Sippin on the Dock of the Bay IPA
>
>
>
> HI Chad:
>
> I'm a very good Friend of Steve Cropper, who wrote
> that song. I will forward the "sippin on the dock....."
> which he will like. Great idea....
>
> Cheers
>
> Fred Scheer
------------------------------
Date: Thu, 30 Apr 2009 10:10:31 -0400
From: stencil <etcs.ret at verizon.net>
Subject: Re: HLT woes
On Wed, 29 Apr 2009 23:23:34 -0400,
in Homebrew Digest #5542 (April 29, 2009)
'groggy' Lehey wrote:
>
>[ ... ] The problem is
>that the element has a flat flange, while the pot has a curved side.
>I've spent a lot of time looking for some way of sealing the join,
>
As long as the hole is not down too close to the turn of the
bilge, you can flatten out a landing zone around it by
placing a stack of fender washers on either face and drawing
up on them with the stoutest bolt that will pass through
them. Lubing the faying faces with (water soluble) Draw-X
or K-Y Jelly helps a little. Let it sit a few hours and
re-torque the bolt if you can. As a preliminary, ensure
that the rim of the hole is free of burrs.
gds, stencil
------------------------------
Date: Thu, 30 Apr 2009 07:20:02 -0700 (PDT)
From: Matt <baumssl27 at yahoo.com>
Subject: pH with excess CaCO3
I store brettanomyces cultures by growing them in test
tubes with wort + 2% CaCO3, then refrigerating. Most of
the CaCO3 never dissolves, so I imagine there is a buffer
effect where any increase in acidity (during growth or
storage) is countered by dissolved carbonate, which is
replaced in solution by some of the previously undissolved
CaCO3. I'm curious what pH is maintained (and I don't
have a pH meter). Anyone know?
Matt
------------------------------
End of HOMEBREW Digest #5543, 04/30/09
*************************************
-------
