FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: pbabcock at hbd.org
***************************************************************
TODAY'S HOME BREW DIGEST BROUGHT TO YOU BY:
Logic, Inc. - Makers of Straight A Cleanser
www.ecologiccleansers.com
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
DONATE to the Home Brew Digest. Home Brew Digest, Inc. is a
501(c)3 not-for-profit organization under IRS rules (see the
FAQ at http://hbd.org for details of this status). Donations
can be made by check to Home Brew Digest mailed to:
HBD Server Fund
PO Box 871309
Canton Township, MI 48187-6309
or by paypal to address serverfund@hbd.org. DONATIONS of $250
or more will be provided with receipts. SPONSORSHIPS of any
amount are considered paid advertisement, and may be deductible
under IRS rules as a business expense. Please consult with your
tax professional, then see http://hbd.org for available
sponsorship opportunities.
***************************************************************
Contents:
How to use a HERMS system (Kevin Eggemeyer)
Re: How to use a HERMS system ("David Houseman")
Re: How to use a HERMS system (Mike Schwartz)
RE: How to use a HERMS system ("Mike Patient")
Ginger beer/kefir grain questions (David Huber)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Beer is our obsession and we're late for therapy! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
NOTE: With the economy as it is, the HBD is struggling to
meet its meager operating expenses of approximately $3500
per year. If less than half of those currently directly
subscribed to the HBD sent in a mere $5.00, the HBD would
be able to easily meet its annual expenses, with room to
spare for next year. Please consider it.
Financial Projection As of 12 May 2011
*** Condition: Green & Healthy ***
501(c)3 revoked in process of reinstating. See Site News
on http://hbd.org for details and progress.
Projected 2011 Budget $3671.04
Expended against projection $1489.37
Projected Excess/(Shortfall) $1858.82
As always, donors and donations are publicly acknowledged
and accounted for on the HBD web page. Thank you
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
LOOKING TO BUY OR SELL USED EQUIPMENT? Please do not post about it here. Go
instead to http://homebrewfleamarket.com and post a free ad there.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITORs on duty: Pat Babcock (pbabcock at hbd dot org), Jason Henning,
Spencer Thomas, and Bill Pierce
----------------------------------------------------------------------
Date: Thu, 7 Jul 2011 02:37:10 -0500
From: Kevin Eggemeyer <keggbrewer at gmail.com>
Subject: How to use a HERMS system
I'm for saving the enzymes! But it's not always easy. Beta-amylase's
optimum temperature is between 144F to 149F. It is heat sensitive and
rapidly denatured at even slightly higher temperatures----very rapidly
inactivated at 158F. Heating the circulating wort in a HERMs above this
temperature will change the enzyme profile of your mash. So, this
potentially doesn't leave much room for a temperature difference to drive
the heat transfer.
The question is: Will the change in the mash enzyme profile affect the
character of the beer to a noticeable extent? The answer, in part, depends
on what the attenuation level of the beer is supposed to be. Higher
attenuation beers would need more care regarding the maximum temperature to
which the wort/mash is exposed. Of course, enzyme activity is not stable
over time either and also falls off, so you have to get their quickly AND
without a large "Delta T" creating enzyme destroying hot spots.
Kevin
------------------------------
Date: Thu, 07 Jul 2011 07:12:33 -0400
From: "David Houseman" <david.houseman at verizon.net>
Subject: Re: How to use a HERMS system
Bruce,
I have a HERMS system from More Beer. Instructions, my practice and
experience has the HLT about 10 to 15 degrees hotter than the temperature
you are trying to achieve in the mash tun. Enzyme deactivation is not just
exposure to temperature but also the time at the temperature. If you are
pumping wort through a HERMS coil, it isn't spending much time at the higher
temperature and it's a small percentage of the wort at any time. When the
HLT is the same temperature you are trying to achieve, the mash tun takes a
very long time to reach that temperature because you are approaching the
temperature asymptotically, averaging the lower temperature of the mash tun
with the heated wort at the target temperature. Going higher means that you
will hit the target temperature much quicker. I have not had a problem
deactivating enzymes with my HLT set at say 165 move my mash tun from 132 to
150 and then maintain the 150 for an hour. I then set my HLT to about 180
to 185 and by the time it is at that temperature the HLT is ready to move
the mash tun up to a 168-170 mash out temperature.
Dave Houseman
------------------------------
Date: Thu, 07 Jul 2011 07:39:33 -0500
From: Mike Schwartz <mjs at seadogboats.com>
Subject: Re: How to use a HERMS system
Bruce Fabijonas asked "How to use a HERMS system"
I used one for many years. It used 20 feet of 3/8" ID copper tube in a coil
in the HLT. I would set my HLT at about 170F to do the rise to
saccharification temperature and 185F to do the mash off, so about 20F
degrees above my target mash temperature. This allowed the temperature to
rise roughly 1 to 1.5F/ minute, though it slowed some as it approached the
target temperature. Never had any issues with destroying enzymes prematurely.
I suspect that the brief time that the wort spent in the tube
at the elevated temperature was not enough to destroy the enzymes to a
degree that would affect the conversion. I used this system on a wide range
of beers including a weizen that was 70% wheat malt where I did steps at 110F
(combination acid, ferulic acid, beta glucan), and 153F.
Mike Schwartz
Beer Barons of Milwaukee
------------------------------
Date: Thu, 7 Jul 2011 12:26:52 -0400
From: "Mike Patient" <mpatient at rta.biz>
Subject: RE: How to use a HERMS system
It is my understanding that you want to set the HLT to the target temp.
HERMS is a slow ramp, that is what you are getting.
If you feel the wort is cooling too much in transit, set it a degree or two
higher, but if you set the HLT to 155, you are mashing at 155.
How slow are you talking about?
I feel some people exaggerate when they say how fast their mash rises.
The following website is very useful
http://sdcollins.home.mindspring.com/HERMS.html
Mike
------------------------------
Date: Thu, 7 Jul 2011 14:22:22 -0400
From: David Huber <n3uks.dave at gmail.com>
Subject: Ginger beer/kefir grain questions
I recently listened to an interview with Raj Apte from the 31 August
2006 Basic Brewing Radio podcast
(http://media.libsyn.com/media/basicbrewing/bbr08-31-06.mp3) regarding
using the ginger-beer plant to make beverages, and I checked out his
presentation given at the 2006 NHC
(http://www2.parc.com/emdl/members/apte/GingerBeer.pdf). I recently
started making my own kefir and I love ginger beer, so I wanted to
give this a shot. Unfortunately, the source he cites back then,
Fermented Treasures, doesn't seem to be in business any longer. I
think I found another source to get the plant, but doing some more
digging around I am confused between ginger beer plant and what seems
to be called water and/or sugar kefir. Are they the same? I can find
a fair number of people on-line who are selling "water kefir," but
hardly anyone who is selling the ginger beer plant. My guess is that
we're talking about the differences between, say, WLP001 and WLP002,
but I want to make sure I get something that makes decent ginger beer
and other soft drinks.
On this same topic, has anyone tried throwing these grains into a
beer? I'm wondering whether the lactobacillus and the yeasts can
thrive in a secondary, or whether they would just die out from the
alcohol and the low pH.
Dave Huber
Jessup, Md.
------------------------------
End of HOMEBREW Digest #5858, 07/07/11
*************************************
-------
