FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: pbabcock at hbd.org
***************************************************************
TODAY'S HOME BREW DIGEST BROUGHT TO YOU BY:
Sponsor The Home Brew Digest!
Visit http://www.hbd.org/sponsorhbd.shtml to learn how
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
DONATE to the Home Brew Digest. Home Brew Digest, Inc. is a
501(c)3 not-for-profit organization under IRS rules (see the
FAQ at http://hbd.org for details of this status). Donations
can be made by check to Home Brew Digest mailed to:
HBD Server Fund
PO Box 871309
Canton Township, MI 48187-6309
or by paypal to address serverfund@hbd.org. DONATIONS of $250
or more will be provided with receipts. SPONSORSHIPS of any
amount are considered paid advertisement, and may be deductible
under IRS rules as a business expense. Please consult with your
tax professional, then see http://hbd.org for available
sponsorship opportunities.
***************************************************************
Contents:
Re: Reinforced Vinyl Tubing (Mark Prior) (Mark Prior)
Re: Capping on Foam (stencil)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* The HBD Logo Store is now open! *
* http://www.hbd.org/store.html *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Beer is our obsession and we're late for therapy! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
NOTE: With the economy as it is, the HBD is struggling to
meet its meager operating expenses of approximately $3400
per year. If less than half of those currently directly
subscribed to the HBD sent in a mere $5.00, the HBD would
be able to easily meet its annual expenses, with room to
spare for next year. Please consider it.
As always, donors and donations are publicly acknowledged
and accounted for on the HBD web page. THank you
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
LOOKING TO BUY OR SELL USED EQUIPMENT? Please do not post about it here. Go
instead to http://homebrewfleamarket.com and post a free ad there.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITORs on duty: Pat Babcock (pbabcock at hbd dot org), Jason Henning,
and Spencer Thomas
----------------------------------------------------------------------
Date: Fri, 14 Aug 2009 23:21:08 -0400
From: Mark Prior <priorm at hotmail.com>
Subject: Re: Reinforced Vinyl Tubing (Mark Prior)
FYI - I was unable to find an answer to my question, so I ended up
contacting the manufacturer directly.
According to the manufacturer, the tubing I use is rated for use up to
175F. It is not recommended for use above this temperature due to
concerns relative to bursting. There are no health concerns or FDA
food-grade issues when the tubing is used at near boiling temperatures
(212F).
I have used this type of tubing for around 10 years at near boiling
temperatures and low pressure (March pump). During that time, I have
never had an issue with bursting.
Mark Prior
------------------------------
Date: Sat, 15 Aug 2009 12:28:36 -0400
From: stencil <etcs.ret at verizon.net>
Subject: Re: Capping on Foam
On Sat, 15 Aug 2009 00:15:16 -0400,
in Homebrew Digest #5593 (August 14, 2009)
Fred L Johnson wrote:
>------------------------------
>
>how does one easily generate
>the foam when capping of foam at bottling from a fermenter or from a
>bottling vessel (not a pressurized keg). Does anyone out there have a
>technique that is tried and true?
>
For the last two years I've been using a Blichmann Beer Gun
in a straight bottle-filler (non-counterpressure) mode. As
the level rises into the neck of the bottle you withdraw the
gun until the muzzle is just at the surface, give the
trigger a quick blip, and get a nice little packet of foam.
You can effect a crude approximation of the BBG by using a
replacement compression-fitting undersink rigid supply line
from the hardware store. The flare at the end of the plated
brass tube is kinda sorta like the trumpet bell of the BBG.
It's what I used for several months after first reading
about the Beer Gun, until I had some cash freed up. The
upper end of a keg dip tube is similar, but pricey. You
still have to rig some sort of valve, or resort to the
kink-the-tube maneuver, but you're ahead by about $40.
gds, stencil
------------------------------
End of HOMEBREW Digest #5594, 08/16/09
*************************************
-------
