FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: pbabcock at hbd.org
***************************************************************
TODAY'S HOME BREW DIGEST BROUGHT TO YOU BY:
Sponsor The Home Brew Digest!
Visit http://www.hbd.org/sponsorhbd.shtml to learn how
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
DONATE to the Home Brew Digest. Home Brew Digest, Inc. is a
501(c)3 not-for-profit organization under IRS rules (see the
FAQ at http://hbd.org for details of this status). Donations
can be made by check to Home Brew Digest mailed to:
HBD Server Fund
PO Box 871309
Canton Township, MI 48187-6309
or by paypal to address serverfund@hbd.org. DONATIONS of $250
or more will be provided with receipts. SPONSORSHIPS of any
amount are considered paid advertisement, and may be deductible
under IRS rules as a business expense. Please consult with your
tax professional, then see http://hbd.org for available
sponsorship opportunities.
***************************************************************
Contents:
Sparge water heater, continued.. ("Mike Maag")
Water (Joe Katchever)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* The HBD Logo Store is now open! *
* http://www.hbd.org/store.html *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Beer is our obsession and we're late for therapy! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
NOTE: With the economy as it is, the HBD is struggling to
meet its meager operating expenses of approximately $3400
per year. If less than half of those currently directly
subscribed to the HBD sent in a mere $5.00, the HBD would
be able to easily meet its annual expenses, with room to
spare for next year. Please consider it.
As always, donors and donations are publicly acknowledged
and accounted for on the HBD web page. THank you
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
LOOKING TO BUY OR SELL USED EQUIPMENT? Please do not post about it here. Go
instead to http://homebrewfleamarket.com and post a free ad there.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITORs on duty: Pat Babcock (pbabcock at hbd dot org), Jason Henning,
and Spencer Thomas
----------------------------------------------------------------------
Date: Mon, 15 Feb 2010 09:13:18 -0500
From: "Mike Maag" <mikemaag at comcast.net>
Subject: Sparge water heater, continued..
Thanks for the replies, both on and off line, about sparge water heaters.
Actually, I was looking into sparge water heaters because I was having
trouble with my March pump. The pump is hard to prime the way it is
currently mounted. It is below the source, but horizontal in/out. I open
the ball valve from the kettle ( heated sparge water) and let it fill the
pump. I lower the hose going from the pump to the sparge water tank, down
below the pump and run the water into a bucket. Then I turn the pump on,
and the hot water comes out fine. I slowly lift the bucket, and as it gets
just above the outlet on the sparge water heater, the FLOW STOPS!!! I was
checking into heat sticks as an interim fix while I got the pump to work
right.
To keep things simple, I' m concentrating on getting the pump right before
the next brew. I.'m going to re-mount the pump vertically and test it.
Hopefully it will be easier to get the air out of the lines. I thought
about putting a bleed on the pump out, but to keep it simple, I'm
repositioning the pump (I need to raise the pump mounting point for outlet
hose clearance). I will post whether the remounting solves the problem or
not.
Cheers,
Mike Maag, Staunton VA (Shenandoah Valley)
------------------------------
Date: Mon, 15 Feb 2010 11:32:56 -0600
From: Joe Katchever <joe at pearlstreetbrewery.com>
Subject: Water
I'm gonna bring back an oldie but a good - let's discuss water. I
recently read some literature that made me rethink my understanding of
brewing water.
OK, first of all, how would you define hardness? How about Alkalinity?
What is the difference and how are they measured?
-Joebob
------------------------------
End of HOMEBREW Digest #5658, 02/15/10
*************************************
-------
